How to Fix DJI Air 2S Error 30064

Error 30064 is an error that DJI Air 2S pilots may encounter. Many users reported this issue on forums and social media. This article will discuss all the possible solutions you may need to solve this issue and help you get your DJI Air 2S into the air again.

What is error 30064?

DJI Air 2S error 30064

When your drone is in error 30064, you will get a message saying Unable to take off (Code:30064). It won’t let you launch your drone.

How to fix DJI Air 2S Error 30064?

Updated to the latest firmware

Luckily, after many pilots reported this issue, DJI had released a new firmware version on 5-11-2021, which basically fixed this issue. So the first thing to do is to check your firmware to make sure it’s up-to-date.

Note: If the error code still exists after the firmware update, then you can try refreshing with DJI Assistant 2 several times for both drone and controller.

Basically, most pilots’ problems can be solved by updating the firmware. If this still can’t address your issue, then you can try the following methods.

Other Method you may need to try

Remove DJI Fly App and Install it Again

Try a different mobile device. Check if using a different device works.

Try a different battery. Use another fully charged battery to see if it works.

Calibrate your drone’s IMU when the GPS signal is strong.

Make sure the GPS signal is strong enough for flying.

Make sure the in-app beginner tutorial is not used.

 

Send your DJI Air 2S to DJI Support

If all the solutions don’t work for you, then it’s probably a hardware issue and the only thing you can do is to contact DJI Support and send the drone back for further check and repair.

 

Leave a Comment

Your email address will not be published. Required fields are marked *