Before you fly your Mavic Air 2 or Mavic Mini, one thing you will have to do is to get familiar with the DJI Fly App so that you will have a better understanding of how to fly your drone and how to get better aerial photos and videos.
You can do a lot of things in the App like check the drone’s status, view the live transmission video, update your firmware, or customize your camera settings.
This article will guide you through everything you need to know about the App and help you get the best photo and video settings for your Mavic Air 2 or Mavic mini.
You will also find a lot of useful tips & tricks for safety and cinematic video shooting.
Note: please make sure you use a compatible device because many Android phones and tablets may have compatibility issues.
What you will learn in this post:
- Main Flight Page Introduction
- Flight Mode
- Drone Status
- Satellites, WiFi and Battery Information
- Advanced Settings
- Auto Take-Off & RTH (Return to home)
- Map and Location
- Flight Telemetry
- Camera Information & Photo Settings
After you power on the drone and the remote controller, then mount your phone on the remote and launch DJI Fly, if everything goes well, you will be shown the home page. Here you can access the current location by tapping the icon in the top left corner.
If you click the book icon in the top right corner, you can find video tutorials of how to use QuickShots, flying tips, Flight Safety, and the user manual.
In the bottom left corner, you can access the photos and videos shot on Mavic Mini by clicking the Album button. The SkyPixel is an aerial photo and video community launched by DJI, people can share their work here. The Profile next to it is a place where you can check your flight logs, view DJI Forum, DJI Store, Find My Drone, and Settings.
Now let’s get into the main flight page by tapping the GO FLY button. Let me walk you through every icon with juicy details.
Main Flight Page of DJI Fly （Mavic Mini）
The Mavic Air 2‘s main flight page is a little bit different, you can find a Sideways Flight button above the Auto Takeoff & RTH.
There are 3 flight modes you can choose when flying.
- Mode P – P means position, it’s a common model we use for the fun of flying or practicing.
- Mode S – S means Sport, you can experience high-speed flying.
- Mode C – C means CineSmooth Mode. Your drone will fly at a very slow speed when you fly in this mode, the gimbal and your drone will also move more precisely. I would recommend using it when you are shooting a video. If you want to capture nice smooth buttery cinematic videos, this mode won’t disappoint you. It will also make everything easy to control.
How to change flight mode?
- Mavic Mini: You can easily change the flight mode by tapping on the current flight mode on the screen.
- Mavic Air 2: Use the toggle on the remote controller, you will be able to change the flight mode from Tripod, Normal to Sport.
Next to Flight Mode is the Drone Status. It shows the current status your drone is in. According to different situations, it may show something like Normal which means it’s good to go. You may also get firmware updates available, GPS signal weak, etc. This is something you need to pay attention to every time before you fly.
If you click on the status, you will see a more detailed page.
Auto RTH Altitude
You can set the return-to-home altitude you want when the drone comes back to the home point itself. Normally I prefer to make it higher than 100ft but this should be set flexibly according to where you fly the drone. We will cover this with more details later.
It allows you to set the max altitude your drone can go.
This will determine how far your drone can go.
It shows us the total storage available, how many photos you can shoot, and you can also quickly format your SD card here.
- Mavic Mini doesn’t come with internal storage and an SD card, you will need to buy one, if you don’t know which one to choose, check this Mavic Mini compatible SD card list for more details.
- Mavic Air 2 has 8GB onboard storage but you will also need at least one microSD card, check how to choose the right sd card for Mavic Air 2.
Satellites, WiFi and Battery Information
Let’s move on to the top right corner. The icon with a Satellite shows how many satellites your drone is connected to. It may bounce which is totally normal. The bar next to the satellite shows the signal strength, it varies from location to location.
The WiFi icon right next to it shows the signal strength between the aircraft and the remote controller. You need to make sure that you always get a really strong connection so that you don’t lose connection to your Mavic Mini.
The Battery icon shows the percentage of the battery level. Next to the battery icon shows the estimated flight time remaining. If you tap on it, it will show a pop-up displaying more information about the battery temperature, flight time, and different voltages of each of the cells within the battery.
If you take a look at the upper right corner on the main flight page, you can see 3 dots which is the quick access to Advanced Settings.
Safety is one of the most important things you should look at. It may save you from a potential crash.
Normally, you need to set this to the Max height according to the local laws, e.g. in the United States, the FAA doesn’t allow drone pilots t0 fly over 400 ft. But sometimes you may find that this will limit your drone when you fly on a tall hill. The Max Altitude is calculated from the ground level, if you are on a location that is much higher or lower than the ground level, you may have problems. So don’t forget to change the settings when you fly at a special location.
I recommend you set it to No Limit so that you can fly as far as you may need to in order to get the photos and videos you want to shoot.
Auto RTH Altitude
I would like to have this set to around 150 ft, it would work just fine most of the time. But remember this is very situational depending on where you fly. If you fly in a park or an open area, there are no tall obstacles, it won’t be a problem, but if you fly in a city where tall buildings are around you, you may need to adjust this accordingly to like 300 ft or higher.
Flight Assistant (Mavic Air 2 Only)
It allows you to set the Obstacle Avoidance Action and the Sideways Flight. When flying in Normal Mode, you can set the obstacle avoidance to Bypass, Brake, or just turn it off according to specific situations.
It also allows you to set the drone only to fly forward. This is useful when you are shooting some
- When flying in Sport Mode, the Obstacle Avoidance Action is not available.
- When flying in Tripod Mode, only Brake and Off are available.
Update Home Point
It allows you to update the home point if you move locations during a flight. You don’t have to manually set the home point before every single flight because the drone does that automatically once it establishes a GPS connection. But if you move mid-flight to a new fly spot and your home point is changed, you can update the home point right here if you want the drone to return to your current location, otherwise, it will go back to the initial spot you take off.
IMU and Compass
IMU and Compass are two of the most important sensors to the Mavic Mini, sometimes you may need to calibrate them to sure your drone flies correctly. If there is something wrong with your IMU or Compass, your drone will not be able to take off.
The compass simply tells the drone which direction it’s flying, just like a handheld compass. IMU is short for the Intertial measurement unit which sounds pretty complicated. For most pilots, we just need to know that it can help the drone hover precisely and keep the drone balanced during flight.
So when you need to calibrate the compass and IMU?
If you see a message in the top left corner on the screen saying that you need to calibrate, you just need to follow the instruction to finish the process, it’s pretty simple and straightforward. Normally, it will happen before you fly your drone for the first time, after travel, after a crash, or if you find that your drone just isn’t flying properly.
Tips: Don’t calibrate your drone next to any metal and any electronics. Those items will throw off the compass calibration and sometimes it’ll actually tell you that the calibration is failed.
Unlock GEO Zone
This option allows you to fly your drone when you run into problems like geofencing. If you want to fly in an area that requires unlocking, you can turn it on and follow the steps to apply. For more details, check: https://www.dji.com/cn/flysafe/self-unlock
Advanced Safty Settings
It’s better to turn the Emergency Propeller Stop on just in case. Normally you won’t need to do this, but it’s hard to say if you have to stop the motors in midair for safety reasons.
Whether you need to keep the Payload Mode on or not depends on your flight, e.g. sometimes if you have to fly with the propeller guards on, you can turn it on so that you will get a more accurate remaining flight time of the battery.
Signal Lost: This allows you to set the drone to RTH, Descend or Hover when you lost signal between the remote controller and the aircraft. Personally, I like to set it to Return to Home.
Find My Drone
If you crash your drone and have trouble finding it. This will help you find your drone. It shows you the last-known location of your drone, you can also have the drone start flashing and beeping if you’re around it but have no idea where it’s.
Flight Mode (Mavic Mini Only)
We have mentioned this earlier. You can switch flight mode from CineSmooth, Position to Sport. But you don’t need to change it here because it’s a waste of time and not that convenient during flight, just tap on the screen homepage, you can do it easily.
Note: You can easily change the flight mode on the Mavic Air 2
The units displayed in the telemetry so you can choose between imperial or the metric system whatever you guys are familiar with. You can also view the metric system and either meters or kilometers next up.
Gimbal Mode. We can change the way the gimbal reacts to the movement. There are two modes you can choose from. The Follow Mode means the gimbal will remain fixed horizontally when the aircraft is moving. When in FPV Mode, the gimbal follows the movement of the drone, the camera will bank with the aircraft as you go left to right. This is one of the most important sections. I often set this to the Follow Mode so that the gimbal stays level no matter which way I fly the drone.
Advanced Gimbal Settings (Mavic Mini Only). Tap on advanced, this allows us to change the pitch speed of the gimbal so how fast the gimbal looks up and down as well as the smoothness of the gimbal when it’s pitching so that’s how smooth the gimbal comes to a start and how it comes to a stop. The Allow Upward Gimbal Rotation allows the camera to point upward if you turn this on, otherwise, it would be locked rate at zero degrees and there’s no way to look upwards.
Need a picture
- Best settings: If you set all these to 0, the gimbal will move up and down abruptly when you dial the gimbal control wheel. In order to get better gimbal movement and cinematic footage, I recommend setting both the Pitch Speed and Pitch Smoothness to 15.
- Also, just keep the Allow Upward Gimbal Rotation on so that you will be able to look up.
- Recenter Gimbal – This is pretty straightforward. It allows the gimbal to just recenter itself if you’re at a weird angle and you just want the gimbal to come right back.
Gimbal Calibration – we’ve got gimbal calibration here which we can do so if our gimbal is experiencing some sort of issue we can recalibrate it to make sure it performs properly.
Stick Mode – This enables you to set your personal preference of how you like to operate your drone. There are 3 options available, you can change between mode 1 mode 2, or mode 3 according to your preference, for most people, Mode 2 is the best practice. If you are used to the way you play video games, you may prefer to use the other two modes.
RC calibration – This allows you to calibrate the sticks of your remote controller.
Flight Tutorial – If you’re brand new to drones or the Mavic Mini you may need to go through the tutorial to get a better understanding of how to fly.
Phone Charging (Mavic Air 2 Only) – This will enable the remote controller to charge your mobile device when connected to the controller.
Button Customization (Mavic Air 2 Only) – You can customize the Function button on the remote controller (Fn on beside the lest stick) according to your preference.
Mavic Air 2 control settings
DJI Fly Camera Settings for Mavic Mini
You can change the image size or the aspect ratio of the photos we shoot we can go with 4 by 3 or 16 by 9. 4 * 3 gives you the largest image of pixels which will give you more space for after effect. And if you use 16 * 9 you will end up cropping out pixels.
You can also see the SD card information which we already mentioned in the status of the aircraft.
Camera Advanced Settings
The Histogram allows you to monitor the exposure level. This is pretty much the easiest way to tell the exposure value. In order to not get too bright or too dark images, you can keep in on so you can monitor in real-time.
You can turn on different gridlines like cross lines, up and down lines, and a crosshair right in the center to help you shoot better aerial photos. Personally, I think that all of that sometimes can be very confusing and it kind of takes up the way or it gets in the way of flying my drone. So for me, I keep that little crosshair on so I can line up my photos appropriately.
If there’s a portion of the image that’s overexposed, we can easily find out through some zebra patterns. This is a little bit annoying if you turn it on because you will always see that zebra pattern on your screen. It sometimes gives you sort of a feeling that something is wrong with your camera and will also interfere with your flying.
When shooting and there are lights in the frame it’s not going to flicker we can match the Hertz of the love the specific lights. Normally we just need to leave it to Auto.
Whether you want to turn on this or not depends on your preference, personally, I never turn video subtitles on any of the drones that I fly.
Cache When Recording
When you are shooting a video, a cached lower resolution version will store on our mobile device. You can set the storage space for cached videos depending on your device’s total capacity.
- Tips: It’s recommended to turn it off because most of the time you don’t need the cached lower resolution photos and videos, and most importantly, if you fly your Mavic Mini with an old device it will slow down your phone or tablet, the live transmission may be laggy, and sometimes you may even get a CPU overload warning.
Reset Camera Settings
This will allow you to get back to the default settings of your camera whenever you want.
DJI Fly Mavic Air 2 Camera Settings
Mavic Air 2 comes with a better camera so you can find more settings when it comes to the Camera.
You can choose either MP4 or MOV when shooting videos according to your preference. When it comes to color, I would like to choose the D-Cinelike so you will have more space for after effect.
You only need to consider Anti-Flicker when shooting indoors under artificial light. Normally, you just need to set it to Auto.
Video Subtitles are the same as that of the Mavic Mini, if you turn it on, you will be able to see it when you play your videos with VLC.
When shooting outside on sunny days, I would like to see the White Balance to Manual.
Auto Sync HD Photos: This will allow the drone to transfer your HD photos automatically to your mobile device.
Storage Location: Mavic Air 2 comes with 8GB onboard storage, you will be able to choose where to store your footage and photos.
This shows the frequency band that you are operating over when flying the Mavic mini.
You can see the channels that your drone and the remote can connect and the level of interference on those channels. It also allows you to select channels manually. It’s recommended to set it to auto so that it can automatically choose the best channel for you.
The Transmission settings on the Mavic Air 2 is a little bit different because it packs the Ocusync 2.0.
You can choose Normal Mode or HD when it comes to the definition of live video. Normal Mode will offer you 720p videos and HD is 1080p.
Mavic Air 2 has two frequencies and they can change automatically according to the inference when flying, you just need to set it to Dual-band.
This is just all of the information about your drone, like the aircraft version, the RC firmware version, the name, and the model. You can also see the app version, how many times the battery was charged. You can see things like our serial number for the camera etc.
Auto Take-Off & RTH (Return to home)
Next, the arrow in the middle of the left side shows the Auto Takeoff button, you just need to put your finger on it until the drone starts the motors. Your Mavic Mini will go up to an altitude of 1.2m and then hover precisely where it is. Please note that it will turn into the RTH (return to home) button after the drone takes off.
Map and Location
If you tap on it, it will open up a larger map and if you tap it again, it then brings the full view of the map, shrinking down the camera video.
Benefit – we can view around we can see some of the different zones as some of the different controlled airspaces points also if we’re flying around we’ll see our flight path and then we can also see where our home point is we can take advantage of some of the different tools on the right side so we can see as a key for some of those different restricted zones on our map we can also clear our flight path using the eraser icon we can also reset our home point we can change the orientation of the map and we can also change the different overlays on the map (Standard, Satelite, and Mixed) according to your preference.
Right next to the Map shows the flight telemetry.
H means the height of the drone, D means the distance of the drone, and above that shows the speed correlated with that direction of movement. e.g. the speed right above the H means the vertical flying speed whether going up or down. The speed above the D shows horizontal speed so we can easily know how fast it goes forward, backward, left, or right. You will get a better understanding of how it works once you get your Mavic Mini up in the air.
Photo and video shooting on Mavic Mini
Let’s move on to the right side in the middle, you will see the camera information, the big white button allows us to take photos, if you want to shoot a video or use QuickShots (A simple and auto way of taking aerial videos), just click the rectangle icon above to switch.
Best settings for taking photos and videos.
- I always shoot the highest resolution that my drone’s camera allows me to because chances are you’re further away from your subject. I guess that it makes more sense to shoot in 2.7 K at 30 frames per second.
- You can choose Single shot or Timed shot accordingly.
Below the big white icon lies the Play button, you can quickly view all the videos and photos stored on your micro SD card.
EV (Exposure Value)
Move on you will see the EV control, you can tweak the exposure value so we can go up to make it brighter as we increase the value, or you can go down and make it darker. You can customize according to the environment.
What does EV mean and how to use it when shooting?
If we switch to Photo mode, you will find a camera icon at the bottom right corner on your screen. You can switch between Auto and Manual when tapping on it.
- Auto – Auto means the camera will determine all the dimensions automatically according to the light, you don’t need to do anything when shooting.
- Manual – Manual allows you to customize the shutter speed, ISO to get your desired photos or videos.
Mavic Air 2 Photo and Video Settings
Tap on the button above the shooting button you will be able to switch between photo, video, QuickShot, and Hyperlapse, according to what you choose, you will also be able to set the frame rate and resolution.
When shooting in 4K@30fps and 2.7k@60fps, it allows you to digitally zoom up to 2x.
Mavic Air 2 video settings
When shooting in 1080p@30fps, it supports up to 4x zoom.
Mavic Air 2 4X zoom
Mavic Air 2 Photo settings
Mavic Air 2 Hyperlapse
This is pretty much all the information for the DJI Fly App, I hope it’s helpful for you. I believe DJI will keep updating the drone and the application, we will also follow the footsteps to keep the information up-to-date. If you have any questions, spot any mistakes, or want to share your settings, please leave a comment below.
15 thoughts on “The Best Settings for Mavic Air 2 / Mavic Mini and DJI Fly In-Depth Review”
I’m using the sandisk v30 1228 gb
Camera is very jerky flying foward and than backward than stopping. It’s there a setting i need to turn off, this is making me not wanted to fly this thing. I’m coming from a mavic pro 1 and never had this issue.
Which MicroSD card do you use? Is it compatible?
Hi Gave, I am an experienced drone operator but new to DJI. I am having trouble pairing my Mavic Air 2 to the controller. I have followed instructions to. Any idea what might be causing this to happen the T and I am still not getting it. Sometimes it will pair and I will see video and all data and controls are present. The DJI Fly app allows takeoff and as soon as I am airborne I lose all signals and the drone will RTH and land. Any idea what might be causing this? Sometimes I cant get the drone to connect at all I just purchased the Mavic Air 2 Is it under warranty?
Have trouble setting my home point.mavic mini,many thanks.
Hi Peter, do you mean you don’t know how to set the home point? Just tap on the 3 dots on the upper-right corner, then choose Safty, you will be able to find the Update Home Point option.
with a new Mini, all updated firmware etc .. the aircarft orientation (bottom middle screen) is more often not there at all. The map is fine, makes sense, arrow facing the right way as the Mini is rotated etc, and there are no system warnings anywhere. I cant find an explanation. Any suggestions? THANKS
Hi Kevin, you can check if you have turned on the permission of your phone’s GPS and compass to DJI Fly. It is also recommended to calibrate your phone’s compass before flying.
I am having difficulty getting out of beginner mode with the DJI fly app. There is no home button or settings feature to disable. Please help.
Thank you for all the details in the DJI Fly App.
Regarding advanced camera settings; can you explain “video subtitles” function?
Hi Howell, video subtitles of Mavic Mini are embedded in the videos, you will be able to find them when playing the original videos in VLC. You can also edit the embedded subtitles using Final Cut or other video editors.
Hi Steve, can I change the cache location to the SD card in the phone?
Hi Luis, I don’t think you can do that. It only allows you to set the storage capacity.
Catch When Recording
Should be “cache”. It means “hidden” literally, not “catch”. In computer jargon, a cache is a second copy of the data usually for faster localized usage. The past tense is not “caught”, but rather “cached”. It’s from the original French “cacher” which means to hide or hold back.
Hi Dave, thank you very much. I have updated the article.